Cases

Explore application configurations for selecting metal filter elements. Compare product forms, installation requirements and the technical information needed for a quotation.

Values describe the listed product families. Confirm the selected material, dimensions, retention test and operating conditions before ordering.

Circular sintered mesh filter discs with supporting frames — **Filter-dryer mesh discs**

Filter-dryer discs for solid–liquid separation

A flat mesh element supports the sequence of filtration, cake washing and drying in one vessel. The element must fit the support structure and sealing arrangement of the machine.

Pharmaceutical, chemical and food-process filter-dryers.

Materials listed: 304, 316L
Diameter range: 100–3000 mm
Listed thicknesses: 1.7, 2.5, 3.5, 6 and 8 mm
Listed filter-grade range: 1–300 µm

Provide the vessel drawing, disc diameter, support pattern, seal detail, solids characteristics and intended cleaning cycle.

Discuss this application

Pleated metal filter candles and their end connections — **Pleated filter candles**

Pleated candles for polymer-fluid filtration

A pleated cylindrical element places a folded filtration layer around a supporting core. In viscous-fluid service, useful area and support design must be considered with the end fitting and the permitted operating differential pressure.

Polymer and other high-viscosity fluid filtration.

Form: Pleated cylindrical element
Media families described: Sintered metal fiber felt; multilayer sintered mesh

Specify the polymer, viscosity at operating temperature, flow rate, mounting dimensions, clean-element pressure-drop target and change-out or cleaning criterion.

Discuss this application

Annular metal filter discs with central openings — **Annular filter discs**

Annular discs for viscous-fluid filter assemblies

The central opening and annular filtration surface create a different installation interface from a candle element. Disc outside diameter, center geometry, seal contact and support must match the assembly.

Polymer-fluid and high-viscosity liquid filtration using disc elements.

Form: Annular filter disc
Installation interface: Center opening and sealing/support arrangement

Send the existing disc drawing or measured outside and inside diameters, hub or seal profile, stack arrangement and flow direction.

Discuss this application

Cylindrical metal mesh filter element with perforated support — **Water-treatment filter element**

Supported mesh cylinders for water-treatment filters

Perforated support and sintered mesh form a cylindrical filter element for water-treatment equipment. Select the layer arrangement and support for the actual flow and cleaning directions rather than choosing by outside dimensions alone.

Automatic cleaning and backwash water-treatment filters.

Structure: Perforated-support sintered mesh
Materials listed: 304, 316L, 2205, 904L
Listed filter-grade range: 1–300 µm

Provide water quality, particle loading, flow rate, housing dimensions, cleaning method and the differential-pressure limits for both filtration and cleaning.

Discuss this application

Porous titanium filter cartridges with metal end fittings — **Sintered titanium cartridges**

Titanium cartridges for liquid prefiltration

A porous titanium wall provides the filtration medium in a fitted cartridge. The cartridge material and connection need to be assessed with the actual process fluid and cleaning method. Fine micron grades require a defined retention test; they do not by themselves establish sterile filtration.

Process-liquid filtration where titanium compatibility is required.

Material: TA1 titanium
Listed filter-grade range: 0.22–50 µm
Outside-diameter range: 14–150 mm
Length range: 20–1500 mm

Provide liquid composition, concentration, temperature, flow rate, required retention definition, housing connection and cleaning chemicals.

Discuss this application

Have a drawing or a process in mind?

Send what you have. We will help clarify the specification.

Request a quote

Custom inquiry process Quality & documentation General question? Contact us